PowerTrac 1500 - 0500 XPR RA, with PRN Ball Nut, Preloaded
Product Specifications
Configure
Product Specifications
Inch Ball Screw
(Screw)Product Info
- Screw Code:
- 1500-0500 XPR RA
- Precision:
- XPR
- Screw Material:
- 4150
- Thread Direction:
- RH
(Screw)Details
- Ball Circle Diameter [in]:
- 1.500
- Lead [in]:
- 0.500
- Root Diameter [in]:
- 1.174
- End Code for Types 1,2,3,5 [* Journals may show tracings of the thread]:
- 25
- End Code for Type 4 [* Journals may show tracings of the thread]:
- 16
(Screw)Performance Specifications
- Lead Accuracy +/- [in./ft.]:
- 0.0010
(Screw)Part Numbers
- 2 ft. Part Number:
- 4 ft. Part Number:
- 6 ft. Part Number:
- XPR15050R72
- 8 ft. Part Number:
- 12 ft. Part Number:
- XPR15050R144
- 16 ft. Part Number:
- 20 ft. Part Number:
(Screw)Weight
- Screw Weight [lb./ft.]:
- 5.30
Inch Ball Nut, for XPR, Ground Accuracy, Preloaded, Fixed, PRN
(Nut)Product Info
- Ball Nut Number:
- PRN10114
- Thread Direction:
- RH
(Nut)Details
- Ball Circle Diameter [in]:
- 1.500
- Lead [in]:
- 0.500
- Nominal Ball Diameter [in]:
- 0.312
- Root diameter [in]:
- 1.174
(Nut)Forces and Torques
- Torque to Raise 1 lb. [in-lb]:
- 0.088
(Nut)Flange Part Numbers
- Flange Part Number:
- -
(Nut)Wiper Part Numbers
- Wiper Kit Part Number:
- ELASTOMER
(Nut)Weight
- Nut Weight [lb]:
- 3.50
(Nut)Performance Specifications
- Maximum Adjustable Preload [lb]:
- Spring Rate x 106 [lb./in.]:
- 5.20
- Dynamic Load [lb]:
- 5650
- Static Load [lb]:
- 35522
More Details
To obtain optimum performance of Nook precision ball screws, it is required that the ball screws machined in their case hardened state. When annealing is applied to the end of the ball screw for machining purposes, the lead accuracy is distorted causing the ball nut to lock or jam on the ball screw.
Nook precision ball screw and nut assemblies provide ease of application without the need to machine or anneal the ball screw, as all that is required is installation. Nook precision assemblies offer turnkey solutions that only require a power source (hand operation or motor). All of the elements are available for quick delivery from shelf stock.
When loading an SSN or PRN style ball nuts on an XPR ball screw, depending on the length of the ball screw, the preload condition may vary. The fit between the ball nut and ball screw will range from a slight clearance (~.0005") to no-lash clearance throughout the travel, which may cause a minimal variation in tare drag torque. If a full preload is required select an SGT ground ball screw instead.