PowerTorq 1000-6-0187 HPR8944
Product Specifications
Configure
Product Specifications
Inch Ball Spline Inner Race
(Inch Ball Spline Inner Race(1))Product Info
- Nominal Diameter [in]:
- 1.000
(Inch Ball Spline Inner Race(1))Details
- Active Circuits:
- 6
- Root Diameter [in]:
- 0.80
(Inch Ball Spline Inner Race(1))Part Numbers
- 12 ft. Part Number:
- SRR6084
- 2 ft. Part Number:
- 4 ft. Part Number:
- SRR6068
- 6 ft. Part Number:
- 8 ft. Part Number:
- SRR6076
(Inch Ball Spline Inner Race(1))Weight
- Inner Race Weight [lb./ft.]:
- 2.2
Inch High Performance Ball Spline Outer Race
(Inch High Performance Ball Spline Outer Race(2))Product Info
- Part Number:
- HPR8944
- Nominal Diameter [in]:
- 1.000
(Inch High Performance Ball Spline Outer Race(2))Details
- Active Circuits:
- 6
- Nominal Ball Diameter [in]:
- 0.188
- Optional Keyway:
- 1/4x1/8x1.625
- Ball Return:
- Cast
- Balls per Outer Race:
- 156
(Inch High Performance Ball Spline Outer Race(2))Weight
- Outer Race Weight [lb]:
- 1.48
(Inch High Performance Ball Spline Outer Race(2))Performance Specifications
- Dynamic Torque [in-lb]:
- 2600
- Static Torque [in-lb]:
- 7800
More Details
The PowerTorq™ Ball Spline assembly uses rolling elements to carry a load similar to an anti-friction (ball) bearing. These elements do not wear when properly lubricated during normal use. The closed path that the bearing balls follow through the outer race is referred to as a circuit. The number of potential circuits varies with the diameter of the spline shaft. When a circuit is loaded with bearing balls, it is referred to as an "active circuit".
PowerTorq™ inner races are made of high quality 4150 alloy steel, induction hardened to Rc 56-60. PowerTorq™ outer races are made of hardened steel with ball tracks heat treated to Rc 56-60. PowerTorq™ ball spline inner and outer races are protected with a black oxide finish.
PowerTorq™ Ball Splines are straight within .010 in/ft when shipped from the factory, and do not exceed .030 inch in any 6 foot section. Twist is limited to .015 in/ft at the ball circle diameter.