NRS S 2W 12x2 w/Wipers
Metric Planetary Roller Screw Assembly, with Split Cylindrical Nut and Wipers, 12x2
Read More
Product Specifications
Product Specifications
Configure
Product Specifications
Product Info
- Nominal Rod Diameter [mm]:
- 12
Details
- Lead [mm]:
- 2
- End Code for Types 1,2,3,5 [* Journals may show tracings of the thread]:
- n/a
Dimensions
- D1 [mm]:
- 26
- D7 [mm]:
- 3
- D8 [mm]:
- -
- L1 [mm]:
- 31
- L2 [mm]:
- -
- Keyway (L x b x h):
- 10x3x1.2
Performance Specifications
- Dynamic Load Ratings Ca [kN]:
- 6.14
- Static Load Ratings Coa [kN]:
- 13.36
More Details
PRELOADED NRS
Split nuts are installed with two halves pushed against each other and the clearance removed for preload. Due to the large number of contacts and great rigidity, a planetary roller screw does not require high preload amounts to perform backlash-free in most application conditions. Split nuts only carry load on a reduced length of thread (half-length minus the half-thickness of the calibrated spacer).NRS MATERIALS
NRS planetary roller screws are made of high strength materials. The screw shaft is made of medium carbon induction hardenable alloy steel. The rollers and nut are manufactured from high grade bearing steel. All rolling surfaces are heat treated to a surface hardness not less than 56 HRC with a case depth suitably chosen to carry the load. Other materials, such as stainless steel, can be provided upon request.Reduced load ratings should be considered when designing stainless steel roller screws.