ActionJac 5-MSJ-IK 24:1
Inch Worm Gear Machine Screw Jack, Inverted Keyed, 5 Ton Capacity, 24:1 Gear Ratio
Read More
Product Specifications
Product Specifications
Configure
Product Specifications
Details
- Capacity [Ton]:
- 5
- Gear Ratio:
- 24:1
- Turns of Worm per Inch Travel:
- 64
- Torque to Raise 1 lb. [in-lb]:
- 0.0166
- Lifting Screw Diameter [in]:
- 1.50
- Screw Lead [in]:
- 0.375
- Root Diameter [in]:
- 1.066
- Tare Drag Torque [in-lb]:
- 10
Performance Specifications
- Maximum Allowable Input [hp]:
- 0.75
- Maximum Input Torque [in-lb]:
- 144
- Maximum Worm Speed at Rated Load [rpm]:
- 287
- Maximum Load at 1750 RPM [lb]:
- 1627
- Starting Torque:
- 2 x Running Torque
Weight
- Base 0 Travel [lb]:
- 30
- Per Inch of Travel [lb]:
- 0.70
- Grease [lb]:
- 1.0
More Details
A Keyed Machine Screw Jack has a keyway machined along the length of the lifting screw. A matching key is fastened to the cover of the jack which will eliminate lift shaft rotation. The keyway in the screw causes greater than normal wear on the internal drive sleeve threads, somewhat reducing jack life.
A Inverted translating jack has a lifting shaft that moves through the gear box. The lift shaft extends out from the bottom of the worm screw jack. A nut is integrated with the worm gear such that the worm gear and nut rotate together. When the lift shaft is held to prevent rotation, the lift shaft will move linearly through the gear box to move the load.