ActionJac 20-BSJ-UK 8:1
Inch Worm Gear Ball Screw Jack, Upright Keyed, 20 Ton Capacity, 8:1 Gear Ratio, Screw Lead 0.5"
Read More
Product Specifications
Product Specifications
Configure

Product Specifications
Details
- Capacity [Ton]:
- 20
- Gear Ratio:
- 8:1
- Turns of Worm per Inch Travel:
- 16
- Torque to Raise 1 lb. [in-lb]:
- 0.0173
- Lifting Screw Diameter [in]:
- 2.25
- Screw Lead [in]:
- 0.500
- Root Diameter [in]:
- 1.850
- BackDrive Holding Torque [ft-lb]:
- 27
- Tare Drag Torque [in-lb]:
- 40
Performance Specifications
- Maximum Allowable Input [hp]:
- 7.50
- Maximum Input Torque [in-lb]:
- 626
- Maximum Worm Speed at Rated Load [rpm]:
- 683
- Maximum Load at 1750 RPM [lb]:
- 15613
- Starting Torque:
- 1.5 x Running Torque
Weight
- Base 0 Travel [lb]:
- 85
- Per Inch of Travel [lb]:
- 1.50
- Grease [lb]:
- 2.2
More Details
Keyed Ball screw jacks is supplied with a device that prevents rotation of the lift shaft. Anti-rotation is accomplished by a square guide attached to the screw translating inside a square stem cover attached to the jack. The square stem tube is supplied with lube fittings.
A Uprighted translating jack has a lifting shaft that moves through the gear box. The lift shaft extends out from the top of the worm screw jack. A nut is integrated with the worm gear such that the worm gear and nut rotate together. When the lift shaft is held to prevent rotation, the lift shaft will move linearly through the gear box to move the load.