Skip to Content

ActionJac 10HL-BSJ-IR 24:1

Inch Worm Gear Ball Screw Jack, Inverted Rotating, 10 Ton Capacity, 24:1 Gear Ratio, Screw Lead 1" Read More
Product Specifications

Configure

Product Specifications

Download Spec Sheet
Specifications Diagram

Details

Capacity [Ton]:
10
Gear Ratio:
24:1
Turns of Worm per Inch Travel:
24
Torque to Raise 1 lb. [in-lb]:
0.0162
Lifting Screw Diameter [in]:
1.50
Screw Lead [in]:
1.000
Root Diameter [in]:
1.140
BackDrive Holding Torque [ft-lb]:
6.0
Tare Drag Torque [in-lb]:
20

Performance Specifications

Maximum Allowable Input [hp]:
1.50
Maximum Input Torque [in-lb]:
323
Maximum Worm Speed at Rated Load [rpm]:
293
Maximum Load at 1750 RPM [lb]:
3334
Starting Torque:
1.5 x Running Torque

Weight

Base 0 Travel [lb]:
50
Per Inch of Travel [lb]:
0.80
Grease [lb]:
1.5

More Details

A Inverted Rotating Screw Jack has a lift shaft that moves a nut as it turns. The lift shaft is fixed to the worm gear. This causes the load, which is attached to the travel nut, to move along the lift shaft. A Inverted Roating Screw jacks has the lift shaft extending out the bottom of the jack.