Skip to Content

ActionJac 1-BSJ-IR 20:1

Inch Worm Gear Ball Screw Jack, Inverted Rotating, 1 Ton Capacity, 20:1 Gear Ratio, Screw Lead 0.2" Read More
Product Specifications

Configure

Product Specifications

Download Spec Sheet
Specifications Diagram

Details

Capacity [Ton]:
1
Gear Ratio:
20:1
Turns of Worm per Inch Travel:
100
Torque to Raise 1 lb. [in-lb]:
0.0045
Lifting Screw Diameter [in]:
0.75
Screw Lead [in]:
0.200
Root Diameter [in]:
0.602
BackDrive Holding Torque [ft-lb]:
0.5
Tare Drag Torque [in-lb]:
3

Performance Specifications

Maximum Allowable Input [hp]:
0.25
Maximum Input Torque [in-lb]:
9
Maximum Worm Speed at Rated Load [rpm]:
1750
Maximum Load at 1750 RPM [lb]:
2000
Starting Torque:
1.5 x Running Torque

Weight

Base 0 Travel [lb]:
8
Per Inch of Travel [lb]:
0.04
Grease [lb]:
0.5

More Details

A Inverted Rotating Screw Jack has a lift shaft that moves a nut as it turns. The lift shaft is fixed to the worm gear. This causes the load, which is attached to the travel nut, to move along the lift shaft. A Inverted Roating Screw jacks has the lift shaft extending out the bottom of the jack.