Skip to Content

Non-Driven Modular Linear Actuators

Non-Driven Modular Linear Actuators are specifically designed to be used in parallel with a variety of the driven modular actuators. All non-driven modular actuators are designed to provide support for a given load without causing tension or binding with another driven actuator.

Non-Driven Modular Linear Actuators should not be used if the parallel placement is greater than 500mm.

  Collaborate with a linear motion experts regarding your application for the ideal solution that best meets your performance requirements and budget.

External Roller Bearing Guided

ELR 30, 40, 60, 60S, 80, 80S, 100, 125

An aluminium hollow section with integral, parallel ground and hardened steel guide rods. The carriage has play-adjustable ball bearing rollers which engage with the guide rods. Two bearing blocks without bearings are fitted. Actuation can be by pneumatic cylinder or other device, or the unit may be used as load-carrying linear slide

ELRZ 30, 40, 60, 60S, 80, 80S, 100, 125

 

UL 40, 60, 80

Very low building roller system achieved by an aluminium guide body with integrated, hardened steel guide rods. The carriage, which has internal linear ball bearings that can be adjusted free of play, moves along the body.

Internal Roller Bearing Guided

QLR 60, 80, 100

A square aluminium profile with an integrated roller guide. The carriage, which has internal linear ball bearings that can be adjusted free of play, moves along the guide body. This roller guide can be driven by a pneumatic cylinder or other additional drives or it serves as a load carrying slide unit.

DLR 120, 160, 200

rectangular aluminium profile with 2 integrated roller guides. The openings of the guide body are sealed with 3 stainless steel cover bands to protect the guide from splash water and dust. Alternatively, the opening can also be covered with a bellow or can be delivered without cover bands. The roller guide can be either driven by an internal pneumatic cylinder or other additional drives or it serves as load carrying linear slide.

Internal Profile Rail Guided

QSR 60, 80, 100, 125

A square aluminium profile with an integrated ball rail. This unit can be driven by a pneumatic cylinder or other additional drives or it serves as a load carrying slide unit.

QSSR 60, 80, 100

A square aluminium profile with an integrated ball rail. The carriage is with leading nut and without drive. The openings of the guide body are covered by a stainless steel cover band to protect the system from splash water and dust.

DSR 120, 160, 200

A rectangular aluminium profile with 2 integrated rail guides. The openings of the guide body are sealed with 3 stainless steel cover bands to protect the guide from splash water and dust. Alternatively, the opening can also be covered with a bellow or can be delivered without cover bands. The positioning system can be either driven by an internal pneumatic cylinder or other additional drives or it serves as load carrying linear slide.

Let's Get Your Project in Motion

Collaborate with one of our technical experts on the specifics of your application to ensure the ideal product fit that best meets your performance requirements and budget.