Skip to Content

Transducers

  • Non-Contact - No wear, such as found with pot wipers on conductive mylar, particularly when mounted on dithered actuators or vibrating installations
  • Low Power Needs - Allows use with printed circuit-level supplies of +24 VDC
  • No Drift - No periodic re-calibration needed
  • Continuous absolute position measurement

Ordering Example:


PA05-P-01 / 0631-1000 SRT RA / V200B-G3 / BC / 12 / ANS

In this sample string, the second character of the final cluster indicates the presence of a sensor.

  • An "A" value indicates an Analog Transducer
  • A "D" value indicates a Digital Transducer.

 

Analog Version

 

Outputs

  • Resolution: Infinite (limited by ripple on the power supply)
  • Repeatability: < ±0.005% full stroke Outputs: 0 - 10 VDC

 

Electronics

  • Operating voltage: 24 VDC
  • Supply Current: 50-140 mA (stroke dependent)

 

NOTE: When using a linear position transducer, add 0.82 in to values L1, L2, and L3 in the dimension table.

 

Digital Version

 

Outputs

  • Resolution: 100 µm, 10 µm, 5 µm (controller dependent)
  • Repeatability: < ±0.005% full stroke
  • Outputs:
    • Pulse (start/stop)
    • RS-422 differential signal

 

Electronics

  • Operating voltage: 24 VDC
  • Supply Current: 50-100 mA (stroke dependent)