Skip to Content

ELZT 100 Extended Carriage

Modular Linear Actuator, External Roller Bearing Guided, External Belt Driven, Model ELZT, Extended Carriage, 100 Read More
Product Specifications

Configure

Product Specifications

Download Spec Sheet
Specifications Diagram

Details

Size:
100
Belt:
8M100
mm/Rev:
304
Number of Teeth:
388
Pully Diameter [mm]:
96.8

Dimensions

Basic Length L [mm]:
755
A [mm]:
230
B [mm]:
62
C [mm]:
130
D [mm]:
110
F [mm]:
100
G [mm]:
143
H [mm]:
160
I [mm]:
30
J [mm]:
178
MM:
M10
N [mm]:
310
OO:
M10
P [mm]:
110
Q [mm]:
575
T:
M10
V [mm]:
-
Shaft Diameter and Length [mm]:
30 x 55
Key:
8x7x40

Speed

Speed Maximum [m/s]:
8

Forces and Torques

No-load torque [Nm]:
2.4
Tensile force 0.2 sec [N]:
4300
Tensile force permanent [N]:
4000
Fy dynamic [N]:
6500
Fx dynamic [N]:
3500
Fz dynamic [N]:
2200
Mx dynamic [Nm]:
230
My dynamic [Nm]:
270
Mz dynamic [Nm]:
500
Fx static [N]:
4000
Fy static [N]:
8000
Fz static [N]:
3600
Mx static [Nm]:
300
My static [Nm]:
400
Mz static [Nm]:
750

Geometrical moments of inertia of aluminum profile

Elastic modulus [N/mm2]:
70000
lx [mm4]:
4440000
ly [mm4]:
4480000

Weight

Additional Weight per 100 mm [kg]:
1.95
Basic Weight [kg]:
40.6

More Details

The carriage is driven by an external linear belt that can be adjusted to reduce lash and is driven along the external roller bearings. The pulleys have maintenance-free ball bearings. Belt tension can be readjusted by a simple screw adjustment device in the carriage.

The ELZT is driven along the guide rods in opposite directions by 2 belts. One belt is tensioned by a tensioning device within the carriage. The other timing belt is tensioned by a tensioning device within the bearing block. The carriage with the drive block (with motor) is screwed to the crosshead. A T-slot profile is screwed to the carriage as an extension arm which can be adjusted to any length