Skip to Content

ELZT 40 Extended Carriage

Modular Linear Actuator, External Roller Bearing Guided, External Belt Driven, Model ELZT, Extended Carriage, 40 Read More
Product Specifications

Configure

Product Specifications

Download Spec Sheet
Specifications Diagram

Details

Size:
40
Belt:
5M25
mm/Rev:
130
Number of Teeth:
26
Pully Diameter [mm]:
41.4

Dimensions

Basic Length L [mm]:
360
A [mm]:
100
B [mm]:
30
C [mm]:
58
D [mm]:
47
F [mm]:
42
G [mm]:
83
H [mm]:
80
I [mm]:
-
J [mm]:
70
MM:
-
N [mm]:
130
OO:
M6
P [mm]:
49
Q [mm]:
257
T:
M6
V [mm]:
-
Shaft Diameter and Length [mm]:
14 x 35
Key:
5x5x28

Speed

Speed Maximum [m/s]:
4

Forces and Torques

No-load torque [Nm]:
0.9
Tensile force 0.2 sec [N]:
450
Tensile force permanent [N]:
360
Fy dynamic [N]:
700
Fx dynamic [N]:
600
Fz dynamic [N]:
650
Mx dynamic [Nm]:
20
My dynamic [Nm]:
18
Mz dynamic [Nm]:
285
Fx static [N]:
360
Fy static [N]:
1200
Fz static [N]:
900
Mx static [Nm]:
25
My static [Nm]:
32
Mz static [Nm]:
35

Geometrical moments of inertia of aluminum profile

Elastic modulus [N/mm2]:
70000
lx [mm4]:
132000
ly [mm4]:
134000

Weight

Additional Weight per 100 mm [kg]:
0.31
Basic Weight [kg]:
3.6

More Details

The carriage is driven by an external linear belt that can be adjusted to reduce lash and is driven along the external roller bearings. The pulleys have maintenance-free ball bearings. Belt tension can be readjusted by a simple screw adjustment device in the carriage.

The ELZT is driven along the guide rods in opposite directions by 2 belts. One belt is tensioned by a tensioning device within the carriage. The other timing belt is tensioned by a tensioning device within the bearing block. The carriage with the drive block (with motor) is screwed to the crosshead. A T-slot profile is screwed to the carriage as an extension arm which can be adjusted to any length