Skip to Content

ActionJac 10AB-MSJ-I 24:1

Inch Worm Gear Machine Screw Jack, Inverted Anti-Backlash, 10 Ton Capacity, 24:1 Gear Ratio Read More
Product Specifications

Configure

Product Specifications

Download Spec Sheet
Specifications Diagram

Details

Capacity [Ton]:
10
Gear Ratio:
24:1
Turns of Worm per Inch Travel:
48
Torque to Raise 1 lb. [in-lb]:
0.0192
Lifting Screw Diameter [in]:
2.00
Screw Lead [in]:
0.500
Root Diameter [in]:
1.410
Tare Drag Torque [in-lb]:
20

Performance Specifications

Maximum Allowable Input [hp]:
1.50
Maximum Input Torque [in-lb]:
384
Maximum Worm Speed at Rated Load [rpm]:
246
Maximum Load at 1750 RPM [lb]:
2813
Starting Torque:
2 x Running Torque

Weight

Base 0 Travel [lb]:
45
Per Inch of Travel [lb]:
1.20
Grease [lb]:
1.5

More Details

Anti-backlash Machine Screw Jacks are used wherever reversible load conditions require precision positioning control. Adjustable backlash Machine Screw Jack models are available to reduce backlash to approximately 0.003".

An Anti-backlash Machine Screw Jack allows the lash between the drive sleeve thread and the lifting screw thread to be controlled by adjusting the top cover of the jack. The anti-backlash jack design has an upper drive sleeve and a lower drive sleeve. Adjustment of the cover changes the relative distance between the drive sleeves. This change in distance compensates for any lash. Because the drive sleeve is split, the life of an Anti-backlash Machine Screw Jack will be less.

Anti-backlash Machine Screw Jacks minimize backlash, but should not be used to completely eliminate backlash. While it may be desirable to totally eliminate backlash, the result would be a lock-up of lifting shaft and drive sleeve.