Skip to Content

ActionJac 2R-BSJ-DC 24:1

Inch Worm Gear Ball Screw Jack, Double Clevis, Reverse Base, 2 Ton Capacity, 24:1 Gear Ratio, Screw Lead 0.25" Read More
Product Specifications

Configure

Product Specifications

Download Spec Sheet
Specifications Diagram

Details

Capacity [Ton]:
2
Gear Ratio:
24:1
Turns of Worm per Inch Travel:
96
Torque to Raise 1 lb. [in-lb]:
0.0043
Torque to Raise 1 lb. Keyed [in-lb]:
0.0047
Lifting Screw Diameter [in]:
1.00
Screw Lead [in]:
0.250
Root Diameter [in]:
0.820
BackDrive Holding Torque [ft-lb]:
1.0
Tare Drag Torque [in-lb]:
4

Performance Specifications

Maximum Allowable Input [hp]:
0.50
Maximum Input Torque [in-lb]:
17
Maximum Worm Speed at Rated Load Non-keyed [rpm]:
1800
Maximum Worm Speed at Rated Load Keyed [rpm]:
1636
Maximum Load at 1750 RPM Non-keyed [lb]:
4000
Maximum Load at 1750 RPM Keyed [lb]:
3740
Starting Torque:
1.5 x Running Torque

Weight

Base 0 Travel [lb]:
18
Per Inch of Travel [lb]:
0.60
Grease [lb]:
0.5

More Details

Double Clevis Jacks are used when it is necessary to move a load through an arc, such as tracking antennas, hinged doors or air dampers. One clevis is mounted on the end of the lift shaft and the other clevis is welded to a heavy duty stem cover, which is welded to the housing. Depending on size, Double clevis designs are available with optional accessories such as boots, motor mounts, right-angle reducers, motors, encoders and rotary limit switches.

Note:

Mounting hardware for double clevis jacks should be specified as heat treated alloy steel clevis pins with at least 100,000 psi ultimate tensile strength.

Double clevis jacks used horizontally will have reduced column strength and life. For most horizontal applications, Nook recommends the use of an Electric Cylinder (contact Nook Engineering for more information).