ELZT 80
Modular Linear Actuator, External Roller Bearing Guided, External Belt Driven, Model ELZT, 80
Read More
Product Specifications
Product Specifications
Configure
Product Specifications
Details
- Size:
- 80
- Belt:
- 8M50
- mm/Rev:
- 256
- Number of Teeth:
- 32
- Pully Diameter [mm]:
- 81.5
Dimensions
- Basic Length L [mm]:
- 494
- A [mm]:
- 170
- B [mm]:
- 60
- C [mm]:
- 100
- D [mm]:
- 90
- F [mm]:
- 80
- G [mm]:
- 140
- H [mm]:
- 130
- I [mm]:
- 30
- J [mm]:
- 140
- MM:
- M6
- N [mm]:
- 270
- OO:
- M10
- P [mm]:
- 90
- Q [mm]:
- 304
- T:
- M10
- V [mm]:
- 10
- Shaft Diameter and Length [mm]:
- 22 x 45
- Key:
- 6x6x40
Speed
- Speed Maximum [m/s]:
- 6
Forces and Torques
- No-load torque [Nm]:
- 1.3
- Tensile force 0.2 sec [N]:
- 2200
- Tensile force permanent [N]:
- 1800
- Fy dynamic [N]:
- 2000
- Fx dynamic [N]:
- 660
- Fz dynamic [N]:
- 1100
- Mx dynamic [Nm]:
- 55
- My dynamic [Nm]:
- 80
- Mz dynamic [Nm]:
- 120
- Fx static [N]:
- 825
- Fy static [N]:
- 3000
- Fz static [N]:
- 1700
- Mx static [Nm]:
- 90
- My static [Nm]:
- 110
- Mz static [Nm]:
- 150
Geometrical moments of inertia of aluminum profile
- Elastic modulus [N/mm2]:
- 70000
- lx [mm4]:
- 1899000
- ly [mm4]:
- 1897000
Weight
- Additional Weight per 100 mm [kg]:
- 1.14
- Basic Weight [kg]:
- 24.0
More Details
The carriage is driven by an external linear belt that can be adjusted to reduce lash and is driven along the external roller bearings. The pulleys have maintenance-free ball bearings. Belt tension can be readjusted by a simple screw adjustment device in the carriage.
The ELZT is driven along the guide rods in opposite directions by 2 belts. One belt is tensioned by a tensioning device within the carriage. The other timing belt is tensioned by a tensioning device within the bearing block. The carriage with the drive block (with motor) is screwed to the crosshead. A T-slot profile is screwed to the carriage as an extension arm which can be adjusted to any length
