Skip to Content

PowerTrax LBB OPN-2000PP

Bearing, Inch, Non-Self-Aligning, Steel Shell, Open, Sealed, 2" Read More
Product Specifications
Reference Number:
OPN-2000PP

Product Specifications

Download Spec Sheet
Specifications Diagram

Product Info

Nominal Shaft Diameter [in]:
2
Part Number:
OPN-2000PP

Dimensions

D Maximum [in]:
3.0000
D Minimum [in]:
2.9994
E [in]:
1
L [in]:
4.750
L1 [in]:
3.000
L2 [in]:
0.105
L3 [in]:
1.531

Weight

Weight [lb]:
3.08

Performance Specifications

F:
50°
Dynamic Load [lb]:
1391
Static Load [lb]:
1461

More Details

NON-SELF-ALIGNING LINEAR BEARINGS

These bearings are used in lower load applications where self alignment is not required. The precision fit between the bearing and shaft is built into the bearing as a result of the solid steel shell. These bearings utilize a molded plastic ball retainer assembled inside a hardened and ground shell.

  • Open LBB bearing are designed for use on fully supported PowerTrax™ HG "L" shafting.
  • Open LBB longitudinal section equal to one ball circuit removed from support rail clearance.
  • Open LBB are available with lip seals or without seals.