PowerTrax LBB-375

Bearing, Inch, Non-Self-Aligning, Steel Shell, Closed, Unsealed, 3/8" Read More
Product Specifications

Reference Number:
LBB-375

Product Specifications

Download Spec Sheet

Product Info

Nominal Shaft Diameter [in]:: ³⁄₈
Part Number:: LBB-375

Dimensions

D Maximum [in]:: 0.6250
D Minimum [in]:: 0.6246
L [in]:: 0.875
L1 [in]:: 0.562
L2 [in]:: 0.040

Weight

Weight [lb]:: 0.04

Performance Specifications

Dynamic Load [lb]:: 38
Static Load [lb]:: 36

More Details

NON-SELF-ALIGNING LINEAR BEARINGS

These bearings are used in lower load applications where self alignment is not required. The precision fit between the bearing and shaft is built into the bearing as a result of the solid steel shell. These bearings utilize a molded plastic ball retainer assembled inside a hardened and ground shell.

Closed LBB bearing are designed for use on end supported PowerTrax™ HG "L" shafting.

Technical Information

Lubrication

Prolong Bearing Assembly Reliability And Life

Seal Specifications

Nook Linear Bearing Seals are designed for use in custom housings where additional sealing is desired. They are made of a synthetic rubber compound to allow smooth linear motion with maximum sealing efficiency.

Precision Series

	POWERTRAX LINEAR BEARING	SHAFT DIA. (in.)	PART NUMBER	DIMENSIONS
				T	O.D.
PRECISION SEALS	LBB-250	1/4"	LS-250	0.125	0.504
	LBB-375	3/8 "	LS-375	0.125	0.629
	LBB-500	1/2"	LS-500	0.125	0.879
	LBB-625	5/8"	LS-625	0.125	1.129
	LBB-750	3/4"	LS-750	0.125	1.254
	LBB-1000	1"	LS-1000	0.187	1.567
	LBB-1250	1/1/4"	LS-1250	0.375	2.004
	LBB-1500	1-1/2"	LS-1500	0.375	2.379
	LBB-2000	2"	LS-2000	0.375	3.004
STAINLESS STEEL SEALS	LBB-250SS	1/4"	LS-250SS	0.125	0.504
	LBB-375SS	3/8"	LS-375SS	0.125	0.629
	LBB-500SS	1/2"	LS-500SS	0.125	0.879
	LBB-625SS	5/8"	LS-625SS	0.125	1.129
	LBB-750SS	3/4"	LS-750SS	0.125	1.254
	LBB-1000SS	1"	LS-1000SS	0.187	1.567

Open Series

	POWERTRAX LINEAR BEARING	SHAFT DIA. (in.)	PART NUMBER	DIMENSIONS
				T	O.D.
PRECISION SEALS	OPN-500	1/2"	LSO-500	0.125	0.629
	OPN-652	5/8"	LSO-625	0.125	0.879
	OPN-750	3/4"	LSO-750	0.125	1.254
	OPN-1000	1"	LSO-1000	0.187	1.567
	OPN-1250	1-1/4"	LSO-1250	0.375	2.004
	OPN-1500	1-1/2"	LSO-1500	0.375	2.379
STAINLESS STEEL SEALS	OPN-375SS	3/8"	LSO-375SS	0.125	0.629
	OPN-500SS	1/2"	LSO-500SS	0.125	0.879
	OPN-625SS	5/8"	LSO-625SS	0.125	1.129
	OPN-750SS	3/4"	LSO-750SS	0.125	1.254
	OPN-1000SS	1"	LSO-1000SS	0.187	1.567

Lubrication is the key to continued performance and reliability of bearing assemblies. LBL-1 is a multi-purpose pure synthetic lubricant. The stable and predictable chemical properties of LBL-1 help it last longer and outperform conventional petroleumbased greases and oils. Lubricant additives fill microscopic surface irregularities to form a smooth, lubricated surface.

LBL-1 Lubricant Features And Benefits

Synthetic, non-toxic, odorless
Low coefficient of friction
Free flowing at down to -40°
USDA H-1 Rating
Water and Saltwater Resistant
Won't drip, run or evaporate
Inhibits rust and corrosion
Long lasting
Reduces friction and wear

LBL-1 Specifications
ISO GRADE	220
PENETRATION (worked)	285
DROPPING POINT	N/A
GELLING AGENT	Synthetic
TIMKEN OK LOAD	40 lbs.
OIL VISCOSITY cst @ 40°C	118-122
OIL VISCOSITY cst @ 100°C	14-17
TEMPERATURE RANGE	-45°C to 450°F

LBL-1 LIQUID
PART NUMBER	LBL-1
NET CONTENTS PER UNIT	4 oz.
PART # NLU-1006	1 BOTTLE weight of 4 oz.
PART # NLU-2006	1 CASE with 12 bottles total weight of 3 lbs.