EXCEL XLEC16UU

Bearing, Inch, High Load Self-Aligning, Closed, Sealed, 1" Read More
Product Specifications

Reference Number:
XLEC16UU

Product Specifications

Download Spec Sheet

Product Info

Nominal Shaft Diameter [in]:: 1
Part Number:: XLEC16UU

Dimensions

D1 [in]:: 1.4900
L Maximum [in]:: 2.230
L Minimum [in]:: 2.250
L1 Maximum [in]:: 1.864
L1 Minimum [in]:: 1.884
L2 [in]:: 0.070
Housing Bore Diameter D Maximum [in]:: 1.5630
Housing Bore Diameter D Minimum [in]:: 1.5625

Performance Specifications

Number of Ball Circuits:: 6
Dynamic Load Maximum [lb]:: 725
Dynamic Load Normal [lb]:: 684
Static Load Maximum [lb]:: 630
Static Load Normal [lb]:: 492

More Details

Designed to fit into precision bores, these inch linear bearings are self-aligning and offer long life. Precision hardened and ground bearing plates with ball conforming tracks are contained in a molded thermoplastic housing.

Closed inch linear bearings are designed for use on end supported PowerTrax™ HG "L" shafting.
Closed Excel inch linear bearings are available with or without Seals

Lubrication

Prolong Bearing Assembly Reliability And Life

Seal Specifications

Nook Linear Bearing Seals are designed for use in custom housings where additional sealing is desired. They are made of a synthetic rubber compound to allow smooth linear motion with maximum sealing efficiency.

Precision Series

	POWERTRAX LINEAR BEARING	SHAFT DIA. (in.)	PART NUMBER	DIMENSIONS
				T	O.D.
PRECISION SEALS	LBB-250	1/4"	LS-250	0.125	0.504
	LBB-375	3/8 "	LS-375	0.125	0.629
	LBB-500	1/2"	LS-500	0.125	0.879
	LBB-625	5/8"	LS-625	0.125	1.129
	LBB-750	3/4"	LS-750	0.125	1.254
	LBB-1000	1"	LS-1000	0.187	1.567
	LBB-1250	1/1/4"	LS-1250	0.375	2.004
	LBB-1500	1-1/2"	LS-1500	0.375	2.379
	LBB-2000	2"	LS-2000	0.375	3.004
STAINLESS STEEL SEALS	LBB-250SS	1/4"	LS-250SS	0.125	0.504
	LBB-375SS	3/8"	LS-375SS	0.125	0.629
	LBB-500SS	1/2"	LS-500SS	0.125	0.879
	LBB-625SS	5/8"	LS-625SS	0.125	1.129
	LBB-750SS	3/4"	LS-750SS	0.125	1.254
	LBB-1000SS	1"	LS-1000SS	0.187	1.567

Open Series

	POWERTRAX LINEAR BEARING	SHAFT DIA. (in.)	PART NUMBER	DIMENSIONS
				T	O.D.
PRECISION SEALS	OPN-500	1/2"	LSO-500	0.125	0.629
	OPN-652	5/8"	LSO-625	0.125	0.879
	OPN-750	3/4"	LSO-750	0.125	1.254
	OPN-1000	1"	LSO-1000	0.187	1.567
	OPN-1250	1-1/4"	LSO-1250	0.375	2.004
	OPN-1500	1-1/2"	LSO-1500	0.375	2.379
STAINLESS STEEL SEALS	OPN-375SS	3/8"	LSO-375SS	0.125	0.629
	OPN-500SS	1/2"	LSO-500SS	0.125	0.879
	OPN-625SS	5/8"	LSO-625SS	0.125	1.129
	OPN-750SS	3/4"	LSO-750SS	0.125	1.254
	OPN-1000SS	1"	LSO-1000SS	0.187	1.567

Lubrication is the key to continued performance and reliability of bearing assemblies. LBL-1 is a multi-purpose pure synthetic lubricant. The stable and predictable chemical properties of LBL-1 help it last longer and outperform conventional petroleumbased greases and oils. Lubricant additives fill microscopic surface irregularities to form a smooth, lubricated surface.

LBL-1 Lubricant Features And Benefits

Synthetic, non-toxic, odorless
Low coefficient of friction
Free flowing at down to -40°
USDA H-1 Rating
Water and Saltwater Resistant
Won't drip, run or evaporate
Inhibits rust and corrosion
Long lasting
Reduces friction and wear

LBL-1 Specifications
ISO GRADE	220
PENETRATION (worked)	285
DROPPING POINT	N/A
GELLING AGENT	Synthetic
TIMKEN OK LOAD	40 lbs.
OIL VISCOSITY cst @ 40°C	118-122
OIL VISCOSITY cst @ 100°C	14-17
TEMPERATURE RANGE	-45°C to 450°F

LBL-1 LIQUID
PART NUMBER	LBL-1
NET CONTENTS PER UNIT	4 oz.
PART # NLU-1006	1 BOTTLE weight of 4 oz.
PART # NLU-2006	1 CASE with 12 bottles total weight of 3 lbs.