Single Reduction Electric Cylinder, With Ball Screw, Preselected Motor, Heavy Duty, 4600 lbs, 8:1, For 2 HP Motor

DD single reduction electric cylinders are ruggedly designed and produced in standard models with thrust capacities from 500 lbs. to 40,000 lbs. Each DD electric cylinders feature a single reduction and are intended for use in industrial environments. They feature ground and hard chrome plated actuator tubes. The exterior surfaces feature industrial enamel paint. Epoxy paint is available on request.

A single reduction electric cylinder may be used individually or in multiple arrangements. Each single reduction electric cylinder is built to specification. For outdoor application of DD electric cylinders, contact Nook Engineering for recommended alterations.

To configure a part number, download 2D/3D models, or request a quote, please select the "Quote or Download" tab and click the "Configure" button. (Step 4 of 4)

Product DD-1008-HD/20XX
Performance Specifications
Travel Rate [in/min] 102
Dynamic Capacity [lb] 4600
Rated Life [in] 10400000
Motor Horse Power [hp] 2
Maximum Rod Reaction Torque [in-lb] 385
Std. Brake Torque [ft-lb] 10
Approximate Stopping Distance No Load [in] 0.20
Approximate Stopping Distance Full Load [in] 0.20
Gear Ratio 8:1
Input Turns Per Inch Of Travel 16.88
Torque To Raise 1 lb. [in-lb] 0.0151
Max Capacity [lb] 20000
Max HP [hp] 5
Basic Weight [lb] 80
Per Inch of Travel [lb] 1.92
Tube Dimensions
L1 Basic Length [in] 15.25
L2 Basic Length [in] 8.88
NEMA 42 Dimensions
L3 [in] -
E [in] -
F [in] -
NEMA 48 Dimensions
L3 [in] -
E [in] -
F [in] -
NEMA 56C Dimensions
L3 [in] 8.25
E [in] 6.75
F [in] 4.38
NEMA 182TC Dimensions
L3 [in] -
E [in] -
F [in] -
NEMA 184TC Dimensions
L3 [in] 9.00
E [in] 9.25
F [in] 4.38
NEMA 213TC Dimensions
L3 [in] -
E [in] -
F [in] -

To continue, please configure your item below.

Jack Accessories - Miter Gearbox

Jack Accessories - Flexible Coupling

Jack Accessories - Line Shafting

Jack Accessories - Handwheel

Jack Accessories - Control Panel