Double Reduction Electric Cylinder, With Acme Screw, Preselected Motor (3 Turns Per Inch), 2700 lb. Capacity, 6:1/6:1, For 1 HP Motor
RAD double reduction electric cylinders are ruggedly designed and produced in standard models with thrust capacities from 500 lbs. to 40,000 lbs. Each RAD electric cylinders feature a double reduction and are intended for use in industrial environments. They feature ground and hard chrome plated actuator tubes. The exterior surfaces feature industrial enamel paint. Epoxy paint is available on request.
A double reduction electric cylinder may be used individually or in multiple arrangements with DD electric cylinders. Each electric cylinder is built to specification. For outdoor application of RAD electric cylinders, contact Nook Engineering for recommended alterations.
To configure a part number, download 2D/3D models, or request a quote, please select the "Quote or Download" tab and click the "Configure" button. (Step 4 of 4)
|Travel Rate [in/min]||18|
|Dynamic Capacity [lb]||4500|
|Motor Horse Power||1|
|Maximum Rod Reaction Torque [in-lb]||402|
|Std. Brake Torque [ft-lb]||6|
|Approximate Stopping Distance No Load [in]||0.03|
|Gear Ratio Primary Reduction||6:1|
|Gear Ratio Secondary Reduction||6:1|
|Input Turns per Inch of Travel||96|
|Torque to Raise 1 lb. [in-lb]||0.0096|
|Max Capacity [lb]||10000|
|Max HP [hp]||1|
|Basic Weight [lb]||66|
|Per Inch of Travel [lb]||1.87|
|L1 Basic Length [in]||12.38|
|L2 Basic Length [in]||6.06|
|NEMA 56C Dimensions|
|NEMA 180TC Dimensions|
To continue, please configure your item below.