Nook Industries provides a
complete selection of inch and metric Ball Screws, Roller Screws, Acme Screws,
Lead Screws, End Bearing Supports, Precision Locknuts, Worm Gear Screw Jacks,
Electric Actuators, HRC 60 Linear Shafting, Linear Bearings and Pillow Blocks
to the Linear Motion Industry.
Series 500 Actuator Application
Engineering and Customer Service Phone Support
1-800-321-7800
216-271-7900 Email
Support
Click on the NOOK
FEEDBACK logo throughout the Nook Industries website to let us
know how the site is performing.
Series 500 LINEAR ACTUATOR
Nook Industries, Inc. has been manufacturing linear actuators for over 40 years. The Series 500 programmable linear actuator is designed to be configured with stepper or servo motors and controls.
The Series 500 actuator offers an expanded range of performance by generating higher loads, longer life, increased duty cycles, higher speed and programmability.
The Series 500 ball screw actuators are rated for continuous duty and can operate at speeds of up to 25 inches per second. Ball screw actuators are used in high speed, high cycle rate applications.
The Series 500 Acme screw actuators are designed for low duty cycle and where self locking is desired.
The Series 500 actuator can be supplied as a complete system including motor, drive and controller. Both parallel and higher speed in-line configurations are available.
IN-LINE SERIES 500 ACTUATOR
PARALLEL SERIES 500 ACTUATOR
Load Capacity
Up to 1,000 lbs.
Travel Length
2, 4, 6, 8, 12, 18 and 24 inches.
Drive Types
Acme Screw, Ball Screw
Load Capacity
Up to 1,000 lbs.
Travel Length
2, 4, 6, 8, 12, 18 and 24 inches.
Drive Types
Acme Screw, Ball Screw
Controls: Controls are complete with I/O, indexer and drive.
Stepper capable of full, half-step or micro stepping.
10 ft. power cable is included.
Servo Controller and Amplifier supplied in one package.
10 ft. power and feedback cables included.
Mounting Styles:
Rear Clevis (Parallel Only)
Tapped Holes
Front Flange
Trunnion
Rod End
Options:
Internal Linear Encoder
Sensors
Brakes
Protective Covers
Ball Screw Options:
3/4" DIA. X 0.200 Lead
3/4" DIA. X 0.500 Lead
5/8" DIA. X 1.000 Lead
Acme Screw Options:
5/8" DIA. X 0.200 Lead
5/8" DIA. X 0.125 Lead
5/8" DIA. X 0.100 Lead
Belt Ratios:
(Parallel Only)
1:1 1.5:1 2:1
Planetary Gear Ratios:
(In-Line or Parallel)
3:1 4:1 5:1 7:1 10:1
Nook Industries awarded a spot on Network World's 2005 Enterprise All-Star list. Nook was selected for its CAD model web tool that lets customers configure and download products
instantaneously.
Nook Industries website reviewed in a MarketingSherpa Case Study. NookIndustries.com receives recognition for the usability of its website and 2D/3D CAD Model Library.
NOOK INDUSTRIES, INC. - An ISO 9001:2008 Registered Company
4950 East 49th Street | Cleveland, Ohio 44125 | phone: (216) 271-7900
or (800) 321-7800 | fax: (216) 271-7020
