For precise position sensing at the input
shaft, an ActionJac™ in-line encoder option may be factory installed
between the motor and motor adapter or Right-Angle Reducer. This
lowcost option requires minimal space, leaving the extension shaft
side of the jack free for clearance, for a rotary limit switch,
or for coupling to another jack.
The in-line encoder’s quadrature output design
allows detection of both speed and direction of shaft rotation.
The ActionJac™ in-line encoder option requires an optional motor
mount or Right-Angle Reducer.
Sensing speed range: 0 -10,000 rpm
Pulse Output: 60 Pulses per revolution
Supply voltage: +12 Volts DC +/-5%
Supply current: 60 mA typical, 115 mA maximum
Output drive capability: 250 mA per channel continuous
Maximum load: 50 ohms per channel
The encoder is face mounted between the motor
and motor mount and will offset the length of the motor .61 inches
for NEMA 56 and 140 frames and .88 inches for NEMA 180 and 210 frames.
|
