SBN
Standard Ball Nut (no preload) for SRT screw –
offer durable, low cost linear motion. Mounting flanges and wiper
kits can be installed on the SBN nuts.
SGN Standard
Ground Nut (“V” thread, no preload)
for SRT, XPR or SGT Screw –
are similar to SBN style ball nuts and have internal threads that
are ground into the ball nut body. These nuts provide smooth, precise
operation on rolled thread or ground thread ball screws.
SEL Standard
Easy-Loc Adjustable Preload Ball Nut for SRT Screw –
designed to eliminate the axial play or movement associated with
standard ball nuts. Mounting flanges and wiper kits can be installed
on the SEL nuts.
SAR Standard
Adjustable Preload Ball Nut Ground Ball Groove,
Integral Flange & Wipers) for SRT Screw –
offer the same high performance features found in precision ground
thread ball nut assemblies with the added ability to run on rolled
thread or ground thread screws. The SAR ball nut features adjustable
preload, ground ball races, integral flange and wipers. The precision
ground flange assures alignment of the nut preventing unnecessary
wear.
SAG Standard
Adjustable Preload Ball Nut
(Ground Ball Groove, Integral Flange and Wipers) for SGT Screw –
offer the precision tolerances of ground ball screw systems with
the flexibility of adjustable preload.
PRN Standard
Internal Preload Nut (“V” thread end with wipers)
for XPR or SGT Screws –
has a preload that is created by shifted internal threads that areground
in a single set-up. The resulting concentricity assures uniform
preload. The PRN ball nuts are compact and stiff due to the single
nut integral preload configuration. Factory fitting on ball screws
provides a backlash-free system with uniform torque, high stiffness
and long life.
SSN Standard
Internal Preload Nut (Integral flange and wipers)
for XPR or SGT Screws –
have the same features as the PRN nut design while incorporating
an integral flange.
|
