Type 6L, End Code 30
End Machining, Metric Medium Journal Typically Used With Duplexed Bearings, Driven Support End, Without Keyway, End Code 30
Specifying standard machined ends results in quicker deliveries. The machined ends shown below represent designs that are compatible with common application requirements for either simple. Included in the chart are the locknut and lockwasher identication. These standard ends may be machined and ground to finish size.
NOTE:A Type 6K, L, or N end is required for compact double bearing EZZEMOUNT™.
|Product||Type 6L, End Code 30|
|Nominal Bearing Journal Size||30|
|C Maximum [MM]||25.00|
|C Minimum [MM]||24.98|
|D Maximum [mm]||30.007|
|D Minimum [mm]||29.994|
|Lock Nut||M30 x 1.5|
No product compatiblities identified for this product.