Type 6K, End Code 10

End Machining, Metric Medium Journal Typically Used With Duplexed Bearings, Driven Support End, With Keyway, End Code 10

Specifying standard machined ends results in quicker deliveries. The machined ends shown below represent designs that are compatible with common application requirements for either simple. Included in the chart are the locknut and lockwasher identication. These standard ends may be machined and ground to finish size.


A Type 6K, L, or N end is required for compact double bearing EZZEMOUNT™.

Product Type 6K, End Code 10
Product Info
Nominal Bearing Journal Size 10
A [mm] 53.5
B [mm] 36.0
C Maximum [MM] 8.00
C Minimum [MM] 7.98
D Maximum [mm] 10.005
D Minimum [mm] 9.996
E [mm] 20.00
F [mm] 2.00
G [mm] 12.0
H [mm] 3.0
Lock Nut M10 x 1.0

    No product compatiblities identified for this product.