ELZT 40 Extended Carriage Standard Extension

Modular Linear Actuator, External Roller Bearing Guided, External Belt Driven, Model ELZT, Extended Carriage, Standard Extension, 40

The carriage is driven by an external linear belt that can be adjusted to reduce lash ans is driven along the external roller bearings. The pulleys have maintenance-free ball bearings. Belt tension can be readjusted by a simple screw adjustment device in the carriage.

The ELZT is driven along the guide rods in opposite directions by 2 belts. One belt is tensioned by a tensioning device within the carriage. The other timing belt is tensioned by a tensioning device within the bearing block. The carriage with the drive block (with motor) is screwed to the crosshead. A T-slot profile is screwed to the carriage as an extension arm which can be adjusted to any length

To configure a part number, download 2D/3D models, or request a quote, please select the "Quote or Download" tab and click the "Configure" button. (Step 4 of 4)

Product ELZT 40 Extended Carriage Standard Extension
Size 40
Belt 5M25
mm/Rev 130
Number of Teeth 26
Pully Diameter [mm] 41.4
Basic Length L [mm] 360
A [mm] 100
B [mm] 30
C [mm] 58
D [mm] 47
F [mm] 42
G [mm] 83
H [mm] 80
I [mm] -
J [mm] 70
MM -
N [mm] 130
P [mm] 49
Q [mm] 257
T M6
V [mm] -
Shaft Diameter and Length [mm] 14 x 35
Key 5x5x28
Speed Maximum [m/s] 4
Forces and Torques
No-load torque [Nm] 0.9
Tensile force 0.2 sec [N] 450
Tensile force permanent [N] 360
Fy dynamic [N] 700
Fx dynamic [N] 600
Fz dynamic [N] 650
Mx dynamic [Nm] 20
My dynamic [Nm] 18
Mz dynamic [Nm] 285
Fx static [N] 360
Fy static [N] 1200
Fz static [N] 900
Mx static [Nm] 25
My static [Nm] 32
Mz static [Nm] 35
Geometrical moments of inertia of aluminum profile
Elastic modulus [N/mm2] 70000
lx [mm4] 132000
ly [mm4] 134000
Additional Weight per 100 mm [kg] 0.31
Basic Weight [kg] 3.6

To continue, please configure your item below.

Modular Actuator Accessories - EL/ML/QL/QS