ELZT 60S Extended Carriage Low Profile Extension

Modular Linear Actuator, External Roller Bearing Guided, External Belt Driven, Model ELZT, Extended Carriage, Low Profile Extension, 60S

The carriage is driven by an external linear belt that can be adjusted to reduce lash and is driven along the external roller bearings. The pulleys have maintenance-free ball bearings. Belt tension can be readjusted by a simple screw adjustment device in the carriage.

The ELZT is driven along the guide rods in opposite directions by 2 belts. One belt is tensioned by a tensioning device within the carriage. The other timing belt is tensioned by a tensioning device within the bearing block. The carriage with the drive block (with motor) is screwed to the crosshead. A T-slot profile is screwed to the carriage as an extension arm which can be adjusted to any length

To configure a part number, download 2D/3D models, or request a quote, please select the "Quote or Download" tab and click the "Configure" button. (Step 4 of 4)

Product ELZT 60S Extended Carriage Low Profile Extension
Size 60S
Belt 8M30
mm/Rev 192
Number of Teeth 24
Pully Diameter [mm] 61.1
Basic Length L [mm] 506
A [mm] 170
B [mm] 39
C [mm] 80
D [mm] 68
F [mm] 60
G [mm] 105
H [mm] 100
I [mm] -
J [mm] 106
MM -
N [mm] 180
P [mm] 59
Q [mm] 379
T M8
V [mm] -
Shaft Diameter and Length [mm] 18 x 45
Key 6x6x40
Speed Maximum [m/s] 7
Forces and Torques
No-load torque [Nm] 1.1
Tensile force 0.2 sec [N] 700
Tensile force permanent [N] 580
Fy dynamic [N] 310
Fx dynamic [N] 470
Fz dynamic [N] 1600
Mx dynamic [Nm] 65
My dynamic [Nm] 140
Mz dynamic [Nm] 170
Fx static [N] 580
Fy static [N] 4100
Fz static [N] 2160
Mx static [Nm] 88
My static [Nm] 190
Mz static [Nm] 230
Geometrical moments of inertia of aluminum profile
Elastic modulus [N/mm2] 70000
lx [mm4] 679000
ly [mm4] 697000
Additional Weight per 100 mm [kg] 0.73
Basic Weight [kg] 10.1

To continue, please configure your item below.

Modular Actuator Accessories - EL/ML/QL/QS