PowerTrac PMT 63 x 12 RH with MPN Ball Nut

Metric Ball Screw AssemblyMetric Ball Screw, Precision Rolled Accuracy, PMT, 65.1mm Ball Circle Diameter, 12mm Lead, RH Thread, Metric Ball Nut, for PMT, Preloaded, Precision Accuracy, MPN

PMT Precision Rolled Ball Screw assemblies feature 25┬Ám/300mm lead accuracy ball screws with precision ground preloaded ball nuts that are an economical, high-performance alternative to ground thread ball screw assemblies.

PMT Precision Rolled Ball Screw are manufactured under tightly controlled conditions in the rolling process. Uniform heat treatment is monitored by temperature sensors to ensure high quality and accurate lead. The preloaded ball nut assemblies ensure accuracy, zero backlash, consistent repeatability, and high system stiffness at low running torque.

Ball nuts feature a unique solid preload that enhances system smoothness, and are factory-fit on the ball screws, providing a backlash-free sytem for long life.

To configure a part number, download 2D/3D models, or request a quote, please select the "Quote or Download" tab and click the "Configure" button. (Step 4 of 4)

drawing
Product PowerTrac PMT 63 x 12 RH with MPN Ball Nut
Metric Ball Screw
(Screw) Product Info
Screw Code 63x12 PMT RA
Precision PMT
Screw Material 4150
Thread Direction RH
(Screw) Details
Screw Part Number 63X12 PMT
Ball Circle Diameter [mm] 65.1
Lead [mm] 12
Root Diameter [mm] 56.98
End Code for Types 1,2,3,5 [* Journals may show tracings of the thread] 50
End Code for Type 4 [* Journals may show tracings of the thread] 32
(Screw) Weight
Screw Weight [g/M] 22046
(Screw) Performance Specifications
Lead Accuracy +/- [μm/300mm] 25
Metric Ball Nut, for PMT, Preloaded, Precision Accuracy, MPN
(Nut) Product Info
Ball Nut Number MPN10335
Thread Direction RH
(Nut) Details
Ball Circle Diameter [mm] 65.1
Lead [mm] 12
Nominal Ball Diameter [mm] 7.94
Root Diameter [mm] 56.98
(Nut) Forces and Torques
Torque to Raise 1 kN [Nm] 2.12
(Nut) Flange Part Numbers
Flange Part Number INTEGRAL
(Nut) Wiper Part Numbers
Wiper Kit Part Number -
(Nut) Weight
Nut Weight [g] 4915
(Nut) Performance Specifications
Lead Accuracy +/- [μm/300mm] 25
Spring Rate x 106 [lb./in.] 1.52
Dynamic Load Ca [kN] 76.91
Static Load Coa [kN] 193

To continue, please configure your item below.

Profile Rail Systems and Runner Blocks

Linear Bearings and Pillow Blocks

Linear Shafting and Shaft Supports

End Machining - Type 1 - Short Journal Typically Used With Single Bearing or Single Bearing EZZE-Mount

End Machining - Type 2 - Medium Journal Typically Used With Duplexed Bearings

End Machining - Type 3 - Long Journal Typically Used With Multiple Sets of Bearings or Double Bearing EZZE-Mount

End Machining - Type 4 - Shaft Journal With No Locknut Thread

Screw Accessories - Ball Screw Lubricant