Type 1N, End Code 105

End Machining, Short Journal Typically Used With Single Bearing or Single Bearing Ezze-Mount, Non-Driven Support End, End Code 105

Specifying standard machined ends results in quicker deliveries. The machined ends shown below represent designs that are compatible with common application requirements for either simple. Included in the chart are the locknut and lockwasher identication. These standard ends may be machined and ground to finish size.

NOTE:

A Type 1N end is required for single bearing EZZEMOUNT™.

drawing
Product Type 1N, End Code 105
Product Info
Nominal Bearing Journal Size 105
Dimensions
C Maximum [in] 4.000
C Minimum [in] 3.999
D Maximum [in] 4.1345
D Minimum [in] 4.1338
F [in] 1.000
G [in] 6.75
Typical Journal for Single Bearing A [in] 10.84
Typical Journal for Single Bearing B [in] 2.84
Typical Journal for Single Bearing E [in] 1.929
Lock Nut AN-21
Lock Washer W-21

Acme and Lead Screw Products - Rolled Inch Acme Screw

Acme and Lead Screw Products - Inch Acme Screw Assembly