Type 4N End Code 24
End Machining, Shaft Journal With No Locknut Thread, Non-Driven Support End, End Code 24
Specifying standard machined ends results in quicker deliveries. The machined ends shown below represent designs that are compatible with common application requirements for a simple end configuration. These standard ends may be machined and ground to finish size.
NOTE:A Type 1N end is required for single bearing EZZEMOUNT™.
A Type 3K, L, or N end is required for double bearing EZZEMOUNT™.
|Product||Type 4N End Code 24|
|Nominal Bearing Journal Size [mm]||24|
|D Maximum [in]||1.5000|
|D Minimum [in]||1.4995|