Type 4L End Code 24
End Machining, Shaft Journal With No Locknut Thread, Driven Support End, Without Keyway, End Code 24
Specifying standard machined ends results in quicker deliveries. The machined ends shown below represent designs that are compatible with common application requirements for a simple end configuration. These standard ends may be machined and ground to finish size.
NOTE:A Type 1N end is required for single bearing EZZEMOUNT™.
A Type 3K, L, or N end is required for double bearing EZZEMOUNT™.
|Product||Type 4L End Code 24|
|Nominal Bearing Journal Size [mm]||24|
|D Maximum [in]||1.5000|
|D Minimum [in]||1.4995|