Type 5N, End Code 75
End Machining, Heavy Duty Journal Typically Used With High Capacity Fixed Support, Non-Driven Support End, End Code 75
Specifying standard machined ends results in quicker deliveries. The machined ends shown below represent designs that are compatible with common application requirements a fixed bearing arrangments. Included in the chart are the locknut and lockwasher identification. These standard ends may be machined and ground to finish size.
NOTE:A Type 5K, L, or N end is required for EZRF Fixed Bearing Supports EZZEMOUNT™.
|Product||Type 5N, End Code 75|
|Nominal Bearing Journal Size [mm]||75|
|D Maximum [mm]||75.012|
|D Minimum [mm]||74.993|
|Lock Nut||SFZ 75X2|