PowerTrac SRT 0375 - 0125 RH

Inch Ball Screw, Standard Accuracy Rolled, SRT, 0.375" Ball Circle Diameter, 0.125" Lead, RH Thread

SRT – Standard Rolled Thread (sometimes referred to as commercial or transport type) ball screws offer the low friction advantage of antifriction screws at lower cost. They are capable of higher speeds and longer predictable life when compared to similar acme type lead screws.

SRT Ball Screws are manufactured from the same high quality materials and produced following the same ISO certified procedures as higher precision screws. Most SRT screws are rolled, induction heat treated and black oxide coated. Three sizes are also available in 17-4 PH stainless steel.

For convenience SRT screws can be supplied completely machined and assembled with nuts, flanges, wipers and EZZE-MOUNTS ready for assembly to your product. Should a standard assembly not fit the application, Nook can machine the screw to your specific design requirements.

To configure a part number, download 2D/3D models, or request a quote, please select the "Quote or Download" tab and click the "Configure" button. (Step 4 of 4)

Product PowerTrac SRT 0375 - 0125 RH
Product Info
Screw Code 0375-0125 SRT RA
Precision SRT
Screw Material 4150
Thread Direction RH
Ball Circle Diameter [in] 0.375
Lead [in] 0.125
Root Diameter [in] 0.300
End Code for Types 1,2,3,5 [* Journals may show tracings of the thread] 7
End Code for Type 4 [* Journals may show tracings of the thread] 4
Performance Specifications
Lead Accuracy +/- [in./ft.] 0.0040
Part Numbers
2 ft. Part Number SRT9420
4 ft. Part Number SRT7538
6 ft. Part Number
8 ft. Part Number
12 ft. Part Number
16 ft. Part Number
20 ft. Part Number
Screw Weight [lb./ft.] 0.31

To continue, please configure your item below.

Profile Rail Systems and Runner Blocks

Linear Bearings and Pillow Blocks

Linear Shafting and Shaft Supports

Ball Screw Products - Inch Standard Accuracy Ball Nut

End Bearing Support - Universal Single Bearing Support

End Bearing Support - Universal Double Bearing Support

End Bearing Support - Flanged Single Bearing Support

End Bearing Support - Flanged Double Bearing Support

End Machining - Type 1 - Short Journal Typically Used With Single Bearing or Single Bearing EZZE-Mount

End Machining - Type 2 - Medium Journal Typically Used With Duplexed Bearings

End Machining - Type 3 - Long Journal Typically Used With Multiple Sets of Bearings or Double Bearing EZZE-Mount

End Machining - Type 4 - Shaft Journal With No Locknut Thread

Screw Accessories - Ball Screw Lubricant