ActionJac 2R-MSJ-IK 6:1
Inch Worm Gear Machine Screw Jack, Inverted Keyed, Reverse Base, 2 Ton Capacity, 6:1 Gear Ratio
A Keyed Machine Screw Jack has a keyway machined along the length of the lifting screw. A matching key is fastened to the cover of the jack which will eliminate lift shaft rotation. The keyway in the screw causes greater than normal wear on the internal drive sleeve threads, somewhat reducing jack life.
A Inverted translating jack has a lifting shaft that moves through the gear box. The lift shaft extends out from the bottom of the worm screw jack. A nut is integrated with the worm gear such that the worm gear and nut rotate together. When the lift shaft is held to prevent rotation, the lift shaft will move linearly through the gear box to move the load.
To configure a part number, download 2D/3D models, or request a quote, please select the "Quote or Download" tab and click the "Configure" button. (Step 4 of 4)
|Product||ActionJac 2R-MSJ-IK 6:1|
|Turns of Worm per Inch Travel||24|
|Torque to Raise 1 lb. [in-lb]||0.0288|
|Lifting Screw Diameter [in]||1.00|
|Screw Lead [in]||0.250|
|Root Diameter [in]||0.698|
|Tare Drag Torque [in-lb]||4|
|Maximum Allowable Input [hp]||2.00|
|Maximum Input Torque [in-lb]||100|
|Maximum Worm Speed at Rated Load [rpm]||1096|
|Maximum Load at 1750 RPM [lb]||2505|
|Starting Torque||2 x Running Torque|
|Base 0 Travel [lb]||15|
|Per Inch of Travel [lb]||0.45|
To continue, please configure your item below.