ActionJac 1-MSJ-DC 20:1
Inch Worm Gear Machine Screw Jack, Double Clevis, 1 Ton Capacity, 20:1 Gear Ratio
Double Clevis Jacks are used when it is necessary to move a load through an arc, such as tracking antennas, hinged doors or air dampers. One clevis is mounted on the end of the lift shaft and the other clevis is welded to a heavy duty stem cover, which is welded to the housing. Depending on size, Double clevis designs are available with optional accessories such as boots, motor mounts, right-angle reducers, motors, encoders and rotary limit switches.
Note:Mounting hardware for double clevis jacks should be specified as heat treated alloy steel clevis pins with at least 100,000 psi ultimate tensile strength.
Double clevis jacks used horizontally will have reduced column strength and life. For most horizontal applications, Nook recommends the use of an Electric Cylinder (contact Nook Engineering for more information).
To configure a part number, download 2D/3D models, or request a quote, please select the "Quote or Download" tab and click the "Configure" button. (Step 4 of 4)
|Product||ActionJac 1-MSJ-DC 20:1|
|Turns of Worm per Inch Travel||100|
|Torque to Raise 1 lb. [in-lb]||0.0105|
|Torque to Raise 1 lb. Keyed [in-lb]||0.0121|
|Lifting Screw Diameter [in]||0.75|
|Screw Lead [in]||0.200|
|Root Diameter [in]||0.502|
|Tare Drag Torque [in-lb]||3|
|Maximum Allowable Input [hp]||0.25|
|Maximum Input Torque [in-lb]||21|
|Maximum Worm Speed at Rated Load Non-keyed [rpm]||750|
|Maximum Worm Speed at Rated Load Keyed [rpm]||651|
|Maximum Load at 1750 RPM Non-keyed [lb]||857|
|Maximum Load at 1750 RPM Keyed [lb]||744|
|Starting Torque||2 x Running Torque|
|Base 0 Travel [lb]||5.5|
|Per Inch of Travel [lb]||0.30|
To continue, please configure your item below.