Modular Linear Actuator, External Roller Bearing Guided, External Belt Driven, Model ELZT, 80

The carriage is driven by an external linear belt that can be adjusted to reduce lash and is driven along the external roller bearings. The pulleys have maintenance-free ball bearings. Belt tension can be readjusted by a simple screw adjustment device in the carriage.

The ELZT is driven along the guide rods in opposite directions by 2 belts. One belt is tensioned by a tensioning device within the carriage. The other timing belt is tensioned by a tensioning device within the bearing block. The carriage with the drive block (with motor) is screwed to the crosshead. A T-slot profile is screwed to the carriage as an extension arm which can be adjusted to any length

To configure a part number, download 2D/3D models, or request a quote, please select the "Quote or Download" tab and click the "Configure" button. (Step 4 of 4)

Product ELZT 80
Size 80
Belt 8M50
mm/Rev 256
Number of Teeth 32
Pully Diameter [mm] 81.5
Basic Length L [mm] 494
A [mm] 170
B [mm] 60
C [mm] 100
D [mm] 90
F [mm] 80
G [mm] 140
H [mm] 130
I [mm] 30
J [mm] 140
N [mm] 270
OO M10
P [mm] 90
Q [mm] 304
T M10
V [mm] 10
Shaft Diameter and Length [mm] 22 x 45
Key 6x6x40
Speed Maximum [m/s] 6
Forces and Torques
No-load torque [Nm] 1.3
Tensile force 0.2 sec [N] 2200
Tensile force permanent [N] 1800
Fy dynamic [N] 2000
Fx dynamic [N] 660
Fz dynamic [N] 1100
Mx dynamic [Nm] 55
My dynamic [Nm] 80
Mz dynamic [Nm] 120
Fx static [N] 825
Fy static [N] 3000
Fz static [N] 1700
Mx static [Nm] 90
My static [Nm] 110
Mz static [Nm] 150
Geometrical moments of inertia of aluminum profile
Elastic modulus [N/mm2] 70000
lx [mm4] 1899000
ly [mm4] 1897000
Additional Weight per 100 mm [kg] 1.14
Basic Weight [kg] 24.0

To continue, please configure your item below.

Modular Actuator Accessories - EL/ML/QL/QS