Pillow Block, Inch, Twin, Open, 1/2"
SELF-ALIGNING PILLOW BLOCKS
Nook Pillow Blocks simplify mounting of Nook Linear Bearings. They are available with EXCEL™ Bearings to fit shafts from 1/4 to 2 inch and 10 to 50mm. Nook Pillow Blocks provide the precision bearing bores necessary for linear bearing installation.
- Open Excel™ bearing Pillow Blocks are designed for use on fully supported PowerTrax™ HG "L" shafting.
- Pillow Blocks are sealed at both ends.
- Open Pillow Blocks longitudinal section equal to one ball circuit removed from support rail clearance.
- Twin Pillow Blocks use two Open Excel™ bearings for larger capacities.
To configure a part number, download 2D/3D models, or request a quote, please select the "Quote or Download" tab and click the "Configure" button. (Step 4 of 4)
|Nominal Shaft Diameter [in]||1⁄2|
|A +/-0.001 [in]||0.687|
|C [in]||3 1⁄2|
|D [in]||1 13⁄100|
|E +/-0.005 [in]||1.688|
|F +/-0.005 [in]||2.500|
|G [in]||1 3⁄8|
|H - Bolt||#6|
|H - Hole [in]||0.17|
|Dynamic Load Maximum [lb]||304|
|Dynamic Load Normal [lb]||304|
|Static Load Maximum [lb]||224|
|Static Load Normal [lb]||224|