PowerTrax LBB OPN-2000

Bearing, Inch, Non-Self-Aligning, Steel Shell, Open, Unsealed, 2"


These bearings are used in lower load applications where self alignment is not required. The precision fit between the bearing and shaft is built into the bearing as a result of the solid steel shell. These bearings utilize a molded plastic ball retainer assembled inside a hardened and ground shell.

  • Open LBB bearing are designed for use on fully supported PowerTrax™ HG "L" shafting.
  • Open LBB longitudinal section equal to one ball circuit removed from support rail clearance.
  • Open LBB are available with lip seals or without seals.

To configure a part number, download 2D/3D models, or request a quote, please select the "Quote or Download" tab and click the "Configure" button. (Step 4 of 4)

Product PowerTrax LBB OPN-2000
Product Info
Nominal Shaft Diameter [in] 2
Part Number OPN-2000
D Maximum [in] 3.0000
D Minimum [in] 2.9994
E [in] 1
L [in] 4.000
L1 [in] 3.000
L2 [in] 0.105
Weight [lb] 2.78
Performance Specifications
F 50°
Dynamic Load [lb] 1391
Static Load [lb] 1461

Linear Shafting and Shaft Supports - Linear Shafting, Inch

Guidance Accessories - Linear Bearing Lubricant