PowerTrax LBB OPN-1500

Bearing, Inch, Non-Self-Aligning, Steel Shell, Open, Unsealed, 1 1/2"


These bearings are used in lower load applications where self alignment is not required. The precision fit between the bearing and shaft is built into the bearing as a result of the solid steel shell. These bearings utilize a molded plastic ball retainer assembled inside a hardened and ground shell.

  • Open LBB bearing are designed for use on fully supported PowerTrax™ HG "L" shafting.
  • Open LBB longitudinal section equal to one ball circuit removed from support rail clearance.
  • Open LBB are available with lip seals or without seals.

To configure a part number, download 2D/3D models, or request a quote, please select the "Quote or Download" tab and click the "Configure" button. (Step 4 of 4)

Product PowerTrax LBB OPN-1500
Product Info
Nominal Shaft Diameter [in] 1 12
Part Number OPN-1500
D Maximum [in] 2.3750
D Minimum [in] 2.3745
E [in] 34
L [in] 3.000
L1 [in] 2.250
L2 [in] 0.088
Weight [lb] 1.44
Performance Specifications
F 60°
Dynamic Load [lb] 948
Static Load [lb] 845

Linear Shafting and Shaft Supports - Linear Shafting, Inch

Guidance Accessories - Linear Bearing Lubricant