PowerTrax LBB OPN-1250
Bearing, Inch, Non-Self-Aligning, Steel Shell, Open, Unsealed, 1 1/4"
NON-SELF-ALIGNING LINEAR BEARINGS
These bearings are used in lower load applications where self alignment is not required. The precision fit between the bearing and shaft is built into the bearing as a result of the solid steel shell. These bearings utilize a molded plastic ball retainer assembled inside a hardened and ground shell.
- Open LBB bearing are designed for use on fully supported PowerTrax™ HG "L" shafting.
- Open LBB longitudinal section equal to one ball circuit removed from support rail clearance.
- Open LBB are available with lip seals or without seals.
To configure a part number, download 2D/3D models, or request a quote, please select the "Quote or Download" tab and click the "Configure" button. (Step 4 of 4)
|Product||PowerTrax LBB OPN-1250|
|Nominal Shaft Diameter [in]||1 1⁄4|
|D Maximum [in]||2.0000|
|D Minimum [in]||1.9995|
|Dynamic Load [lb]||724|
|Static Load [lb]||726|