PowerTrax LBB OPN-1000

Bearing, Inch, Non-Self-Aligning, Steel Shell, Open, Unsealed, 1"


These bearings are used in lower load applications where self alignment is not required. The precision fit between the bearing and shaft is built into the bearing as a result of the solid steel shell. These bearings utilize a molded plastic ball retainer assembled inside a hardened and ground shell.

  • Open LBB bearing are designed for use on fully supported PowerTrax™ HG "L" shafting.
  • Open LBB longitudinal section equal to one ball circuit removed from support rail clearance.
  • Open LBB are available with lip seals or without seals.

To configure a part number, download 2D/3D models, or request a quote, please select the "Quote or Download" tab and click the "Configure" button. (Step 4 of 4)

Product PowerTrax LBB OPN-1000
Product Info
Nominal Shaft Diameter [in] 1
Part Number OPN-1000
D Maximum [in] 1.5625
D Minimum [in] 1.5621
E [in] 5215625
L [in] 2.250
L1 [in] 1.625
L2 [in] 0.070
Weight [lb] 0.5
Performance Specifications
F 60°
Dynamic Load [lb] 445
Static Load [lb] 438

Guidance Accessories - Linear Bearing Lubricant