PowerTrax LBB OPN-500PP

Bearing, Inch, Non-Self-Aligning, Steel Shell, Open, Sealed, 1/2"


These bearings are used in lower load applications where self alignment is not required. The precision fit between the bearing and shaft is built into the bearing as a result of the solid steel shell. These bearings utilize a molded plastic ball retainer assembled inside a hardened and ground shell.

  • Open LBB bearing are designed for use on fully supported PowerTrax™ HG "L" shafting.
  • Open LBB longitudinal section equal to one ball circuit removed from support rail clearance.
  • Open LBB are available with lip seals or without seals.

To configure a part number, download 2D/3D models, or request a quote, please select the "Quote or Download" tab and click the "Configure" button. (Step 4 of 4)

Product PowerTrax LBB OPN-500PP
Product Info
Nominal Shaft Diameter [in] 12
Part Number OPN-500PP
D Maximum [in] 1.8750
D Minimum [in] 0.8746
E [in] 932
L [in] 1.438
L1 [in] 0.875
L2 [in] 0.047
L3 [in] 0.531
Weight [lb] 0.12
Performance Specifications
F 60°
Dynamic Load [lb] 88
Static Load [lb] 79

Linear Shafting and Shaft Supports - Linear Shafting, Inch

Guidance Accessories - Linear Bearing Lubricant