Bearing, Inch, Non-Self-Aligning, Steel Shell, Closed, Unsealed, 1"
NON-SELF-ALIGNING LINEAR BEARINGS
These bearings are used in lower load applications where self alignment is not required. The precision fit between the bearing and shaft is built into the bearing as a result of the solid steel shell. These bearings utilize a molded plastic ball retainer assembled inside a hardened and ground shell.
- Closed LBB bearing are designed for use on end supported PowerTrax™ HG "L" shafting.
To configure a part number, download 2D/3D models, or request a quote, please select the "Quote or Download" tab and click the "Configure" button. (Step 4 of 4)
|Nominal Shaft Diameter [in]||1|
|D Maximum [in]||1.5625|
|D Minimum [in]||1.5621|
|Dynamic Load [lb]||371|
|Static Load [lb]||353|