PowerTrax LBB-500

Bearing, Inch, Non-Self-Aligning, Steel Shell, Closed, Unsealed, 1/2"

NON-SELF-ALIGNING LINEAR BEARINGS

These bearings are used in lower load applications where self alignment is not required. The precision fit between the bearing and shaft is built into the bearing as a result of the solid steel shell. These bearings utilize a molded plastic ball retainer assembled inside a hardened and ground shell.

  • Closed LBB bearing are designed for use on end supported PowerTrax™ HG "L" shafting.

To configure a part number, download 2D/3D models, or request a quote, please select the "Quote or Download" tab and click the "Configure" button. (Step 4 of 4)

drawing
Product PowerTrax LBB-500
Product Info
Nominal Shaft Diameter [in] 12
Part Number LBB-500
Dimensions
D Maximum [in] 0.8750
D Minimum [in] 0.8746
L [in] 1.250
L1 [in] 0.875
L2 [in] 0.047
Weight
Weight [lb] 0.11
Performance Specifications
Dynamic Load [lb] 88
Static Load [lb] 79

Linear Shafting and Shaft Supports - Linear Shafting, Inch

Guidance Accessories - Linear Bearing Lubricant