PowerTrax LBB-250

Bearing, Inch, Non-Self-Aligning, Steel Shell, Closed, Unsealed, 1/4"


These bearings are used in lower load applications where self alignment is not required. The precision fit between the bearing and shaft is built into the bearing as a result of the solid steel shell. These bearings utilize a molded plastic ball retainer assembled inside a hardened and ground shell.

  • Closed LBB bearing are designed for use on end supported PowerTrax™ HG "L" shafting.

To configure a part number, download 2D/3D models, or request a quote, please select the "Quote or Download" tab and click the "Configure" button. (Step 4 of 4)

Product PowerTrax LBB-250
Product Info
Nominal Shaft Diameter [in] 14
Part Number LBB-250
D Maximum [in] 0.5000
D Minimum [in] 0.4996
L [in] 0.750
L1 [in] 0.437
L2 [in] 0.040
Weight [lb] 0.02
Performance Specifications
Dynamic Load [lb] 25
Static Load [lb] 27

Linear Shafting and Shaft Supports - Linear Shafting, Inch

Guidance Accessories - Linear Bearing Lubricant