T Mounted CC Series Compact Cylinder Features
HIGH PERFORMANCE, LOW COST, POSITIONING SYSTEM 3000 LB. STATIC CAPACITY
Nook Industries CC™ Actuators are a combination of an electric motor and an acme screw or a high efficiency ball screw. They are designed to be ready to install directly into any industrial or commercial application. They are ideally suited for any OEM application where linear motion is needed.
T-Mount configuration is designed with two actuating cylinders that work in opposing directions. Both actuator rods are connected to the same motor and gearbox providing a uniform synchronized motion in the opposite direction.
These high-quality actuators feature
- Durable construction
- Dependable performance
- Long-life operation
- High repeatability
- Operation in either compression or tension loading applications
- Adjustable limit switches
- Lifetime lubrication
- Mechanical overload protection
- Corrosion resistant exterior surfaces
- Duty Cycle 25% max "on-time" of 5 minutes at rated load.
- Operating temperature range is -30°F to +160°F
- Environmental Protection Class - IP54
Please choose from the following T Mounted CC Series Compact Cylinder categories
Please select a product below to proceed.
| Details | |||||
| Product | Voltage | Gear Ratio | Load Capacity [lb] | Speed [in/sec] | Amps |
| CCT18-HD A | |||||
| 12 VDC | 18:1 | 750 | 1 | 15 | |
| CCT19-HD A | |||||
| 12 VDC | 19:1 Belt Drive | 750 | 1 | 15 | |
| CCT28-HD A | |||||
| 12 VDC | 28:1 | 1250 | 0.6 | 15 | |
| CCT58-HD A | |||||
| 12 VDC | 58:1 | 1500 | 0.3 | 10 | |
| CCT18-HD F | |||||
| 12 VDC Hi Speed | 18:1 | 750 | 1.4 | 25 | |
| CCT19-HD F | |||||
| 12 VDC Hi Speed | 19:1 Belt Drive | 750 | 1.4 | 25 | |
| CCT28-HD F | |||||
| 12 VDC Hi Speed | 28:1 | 1250 | 0.9 | 23 | |
| CCT58-HD F | |||||
| 12 VDC Hi Speed | 58:1 | 1500 | 0.5 | 15 | |
| CCT18-HD B | |||||
| 24 VDC | 18:1 | 750 | 0.9 | 9 | |
| CCT19-HD B | |||||
| 24 VDC | 19:1 Belt Drive | 750 | 0.9 | 9 | |
| CCT28-HD B | |||||
| 24 VDC | 28:1 | 1250 | 0.6 | 9 | |
| CCT58-HD B | |||||
| 24 VDC | 58:1 | 1500 | 0.3 | 6 | |
| CCT18-HD C | |||||
| 36 VDC | 18:1 | 750 | 1 | 7 | |
| CCT19-HD C | |||||
| 36 VDC | 19:1 Belt Drive | 750 | 1 | 7 | |
| CCT28-HD C | |||||
| 36 VDC | 28:1 | 1250 | 0.7 | 6 | |
| CCT58-HD C | |||||
| 36 VDC | 58:1 | 1500 | 0.4 | 4 | |
| CCT18-HD D | |||||
| 90 VDC | 18:1 | 750 | 0.75 | 1 | |
| CCT19-HD D | |||||
| 90 VDC | 19:1 Belt Drive | 750 | 0.75 | 1 | |
| CCT28-HD D | |||||
| 90 VDC | 28:1 | 1250 | 0.45 | 1.5 | |
| CCT58-HD D | |||||
| 90 VDC | 58:1 | 1500 | 0.25 | 1 | |
| CCT18-HD E | |||||
| 110 VAC | 18:1 | 750 | 0.7 | 1.1 | |
| CCT19-HD E | |||||
| 110 VAC | 19:1 Belt Drive | 750 | 0.7 | 1.1 | |
| CCT28-HD E | |||||
| 110 VAC | 28:1 | 1250 | 0.4 | 1 | |
| CCT58-HD E | |||||
| 110 VAC | 58:1 | 1500 | 0.2 | 0.6 | |
| Details | |||||
| Product | Voltage | Gear Ratio | Load Capacity [lb] | Speed [in/sec] | Amps |
| CCT18-A8 A | |||||
| 12 VDC | 18:1 | 250 | 0.7 | 8 | |
| CCT28-A8 A | |||||
| 12 VDC | 28:1 | 500 | 0.4 | 10 | |
| CCT58-A8 A | |||||
| 12 VDC | 58:1 | 750 | 0.2 | 9 | |
| CCT18-A8 F | |||||
| 12 VDC Hi Speed | 18:1 | 250 | 1.1 | 14 | |
| CCT28-A8 F | |||||
| 12 VDC Hi Speed | 28:1 | 500 | 0.6 | 16 | |
| CCT58-A8 F | |||||
| 12 VDC Hi Speed | 58:1 | 750 | 0.3 | 14 | |
| CCT18-A8 B | |||||
| 24 VDC | 18:1 | 250 | 0.8 | 6 | |
| CCT28-A8 B | |||||
| 24 VDC | 28:1 | 500 | 0.4 | 7 | |
| CCT58-A8 B | |||||
| 24 VDC | 58:1 | 750 | 0.2 | 6 | |
| CCT18-A8 C | |||||
| 36 VDC | 18:1 | 250 | 0.8 | 4 | |
| CCT28-A8 C | |||||
| 36 VDC | 28:1 | 500 | 0.4 | 5 | |
| CCT58-A8 C | |||||
| 36 VDC | 58:1 | 750 | 0.2 | 5 | |
| CCT18-A8 D | |||||
| 90 VDC | 18:1 | 250 | 0.5 | 1 | |
| CCT28-A8 D | |||||
| 90 VDC | 28:1 | 500 | 0.3 | 1.5 | |
| CCT58-A8 D | |||||
| 90 VDC | 58:1 | 750 | 0.15 | 1.3 | |
| CCT18-A8 E | |||||
| 110 VAC | 18:1 | 250 | 0.5 | 0.6 | |
| CCT28-A8 E | |||||
| 110 VAC | 28:1 | 500 | 0.3 | 0.9 | |
| CCT58-A8 E | |||||
| 110 VAC | 58:1 | 750 | 0.15 | 0.9 | |