Aerodynamic Racing Actuation

Cleveland, OH - May 4, 2011

Nook Industries ActionJac Pivotal To Spring & Bump-Stop Rating System

Spring & Bump-Stop Profile:

Like all set up components in auto racing, there is no 'magic' winning adjustment; each of the car's pieces needs to work in concert as a single unit to maximize a particular driver's feel. That's the case with NASCAR COT (Cars of Tomorrow) modern spring and bump stops. The coil binding and micro-cellular polyurethane bumpers are an integral part of the suspension workings that are inserted into the front shock shafts to control the travel.

(See Image 1 in Figure 1 Below)

Often overlooked, the spring and bump rubber rates are an increasingly vital part of the suspension performance. Essentially, the spring and bump stop rubber size/stiffness ratings and shock travel combine to allow the front suspension to move during corner entry to nail the splitter to the track. Having good data acquisition on the assorted spring and bump stops in use acts as an invaluable commodity that can put the suspension back into a proper and optimal operating range.

Test Rating Solution:

In an effort to provide more accurate spring and bump stop ratings for today's top racing teams, Earnhardt Technologies Group (ETG: Mooresville, NC) has recently developed its advanced Spring Bump Stop Rater (SBSR). Essentially, ETG's SBSR system emulates the vertical forces applied to the springs and bump stops allowing accurate decisions by engineers and crew chiefs; thus maximizing suspension performance.

The SBSR was originally developed as a prototype three years ago to replace the traditional hydraulic testing systems that were noisy, messy, and inaccurate. These hydraulic systems lacked the necessary precision required for repeatable increments to deliver complete motion control, which is needed to coordinate chassis geometry measurement and data acquisition.

The complexities and advanced capabilities of the SBSR system depend on the accuracy and precision of its linear motion system. ETG sought out the most precise, accurate, and powerful lifting system in the world, The ActionJac™ Screw Jack system. Manufactured by Nook Industries (Cleveland, OH) the ActionJac™ Machine Screw Jack provided the exact support needed to bring the SBSR into fruition. The Nook Precision Actuator Group worked closely with the ETG team to assess needs, make adjustments, and pair the correct solution with the SBSR system in making this project a success.

Coupled with a servo-driven motor, the 5-Ton (5-MSJ-UK) (See Image 2 in Figure 1 Below) worm gear driven ActionJac Screw Jack system provides pivotal 'up/down' motion in small, precise, and repeatable travel increments to test the vertical forces acting on the spring and bump stops on the racetrack - ultimately providing a dynamic rating to control the displacement algorithm.

The SBSR implements a top load cell which measures the load and displacement as they compress the bump stop (or coil-bind the spring). The ActionJac and servo motor controls the 'up/down' motion within a variety of controlled travel scenarios and test configurations. The ActionJac is also self locking and holds to a specific set point.

ActionJac™ Machine Screw Jack Specifications:

The ActionJac is time-tested and was originally developed in 1969 for precision satellite dish actuation. It has been continuously perfected throughout the years and comprises unforgiving lifting power coupled with unparalleled precision. The ActionJac has become known industry-wide as the most reliable source of lifting actuation and is backed by a 5-year iron-clad warranty.

(See Image 3 in Figure 1 Below)

Nook's ActionJac (5-MSJ-UK) features a lifting shaft comprised of alloy steel with a minimum tensile strength of 95,000 psi. Manufactured with a lead accuracy of approximately 0.004" per foot, the 5-Ton ActionJac™ (5-MSJ-UK) provides a 24:1 gear ratio and a reliable load handling capacity of 500 lbs. per inch of travel on the repeatable spring bump stop test. Nook's ActionJac line incorporates a rugged worm gear set arrangement that uses an alloy steel worm, which drives a high strength bronze worm gear (drive sleeve). The worm shaft is supported on tapered roller bearings with external seals to prevent loss of lubrication.

Results / Conclusion:

ETG provides a variety of engineering services and parts needs to more than 30 teams in the NASCAR Sprint Cup, NASCAR Nationwide Series and Camping World Truck Series racing community, and their SBSR is gaining interest from a number of teams. Currently, two SBSR's are in active operation with great results and ETG is now offering the unit for commercial sale.

According to ETG's Test Engineer Keith Lindgren, "ETG has perfected the system with Nook's ActionJac and servo motor allowing us to test repeatedly for specific circumstances." Lindgren also noted that 2010's Daytona 500 winner Jamie McMurray's team utilized the tool on the #1 Bass Pro Shop's Chevrolet in preparation for the race.

Nook Industries Vice President of the Actuator Group, Jim Mangan stated that, "The unique configuration and linear performance variables of the ActionJac Machine Screw Jack and servo motor takes the SBSR a step further beyond static testing and lets racing teams know the dynamic rating of their springs and bump stops - measuring the free height, the total travel and the effect of spring rubbers. Ultimately, it provides today's modern racing teams with a cleaner, more accurate suspension and travel measurement tool."

Corporate Profile:

For over 40 years, Nook Industries, Inc. has been a leading manufacturer of linear motion components and linear motion control systems. Manufacturing one of the most comprehensive selections of integrated linear motion systems in the world, Nook's progressive growth has been achieved through its commitment to quality, continuous improvement, defect prevention, and the use of statistical methods and consistent training to ensure the quality of its products.

Headquartered in Cleveland, Ohio, Nook Industries is an ISO 9001-2008 Registered company that provides controlled motion solutions in a wide range of industries including; transportation, medical/diagnostics, paper, chemical, food/beverage, solar/aerospace, entertainment and communications markets. Clients in these markets rely on the company's products for tooling, product design and engineering flexibility to provide modified standard products to meet their respective application requirements.

Whether the application requires an off-the-shelf linear motion component or an engineered solution tailored to fit your application - Nook provides comprehensive engineering, design and analysis in providing the highest quality linear motion manufacturing solutions on the market today.

For more detailed information, visit the Nook web site at: or call: 1-800-321-7800.

©2011 Nook Industries

Figure 1

Editorial Contact:

Agency Contact: Rachel Kerstetter 216.242.0415

Corporate Contact: Jeff Naymik 216.271.7900 x250