Electric Cylinders Bellow Boots

Standard And Special Bellow Boots

Bellows boots are available for all sizes and configurations of Electric Cylinders. A boot protects the tube from contamination.

Standard boots are sewn from black neoprene-covered nylon fabric for oil, water and weather resistance and are acceptable for use in -30°Fto +300°F environments. Optional materials are available for specific operating conditions (see chart).

Standard boots are furnished with tie straps for electric cylinders with greater than 65 inches travel. Tie straps are attached from convolution to convolution and help the boot extend uniformly.

Special End Configurations

See Image 2 in Figure 1 Below for diagrams.

Special Boot Materials

DESCRIPTION TERMPERATURE RANGE APPLICATION COMMENTS
Hypalon-Coated Nylon -30°F to +300°F Chemical Resistance, Wash Down
Silicone Coated Fiberglass -67°F to +550°F High Temperature
Aluminum-Coated Fiberglass -65°F to +700°F High Temperature, Hot Chips, Welding Splatter

NOTE: Retracted boot length may increase with some special materials.

Figure 1