Pre-Assembled Flange Mounts with a Handwheel (Pilot Facing In)

Notes:

  • Dimensions reflect a 1/2" over travel at each end. Add Travel to measurements below for total length.
  • Larger screw sizes with EZZE-MOUNT™ bearing mounts are available. Consult factory engineers for details.

Dia-Turns
Per In
A (in) B (in) C (in) Size Part No.   Dia-Turns
Per In
A (in) B (in) C (in) Size Part No.
5/8 - 10 3.57 6.48 6.24 4" HO43* 1 - 6 4.09 7.27 8.39 6" HO64
3/4 - 2 3.57 6.48 6.24 4" HO43* 1 - 10 4.27 7.79 8.92 6" HO65
3/4 - 3 3.57 6.48 6.24 4" HO43* 1-1/8 - 5 4.27 7.79 8.92 6" HO65**
3/4 - 5 3.57 6.48 6.24 4" HO43* 1-1/4 - 4 4.52 8.04 9.17 6" HO65**
3/4 - 6 3.78 6.79 7.55 4" HO44 1-1/4 - 5 4.72 8.57 9.92 8" HO86
3/4 - 10 4.03 7.04 8.17 6" HO64 1-1/2 - 2 5.26 9.57 10.88 8" HO88
7/8 - 6 4.27 7.79 8.92 6" HO65 ** 1-1/2 - 2-2/3 5.27 9.12 10.47 8" HO86
1 - 1 4.09 7.27 8.39 6" HO64 1-1/2 - 4 5.26 9.57 10.88 8" HO88
1 - 2 4.09 7.27 8.39 6" HO64 1-1/2 - 5 5.26 9.57 10.88 8" HO88
1 - 4 4.09 7.27 8.39 6" HO64 1-1/2 - 10 5.26 9.57 10.88 8" HO88
1 - 5 4.09 7.27 8.39 6" HO64  

* Indicates modified Type 3 end machining required
** HO65 handwheel has the same outer dimensions as HO64 but different bore

Figure 1