ActionJac™ motor mount assemblies are designed
for standard motors and include jaw type couplings. These assemblies
are stocked for jack sizes 2.5, 5,10,15 and 20 and are available
for the jack sizes listed in the table. Non-standard motor mounts
can be designed for special requirements including, special couplings,
small NEMA frame motors, DIN standard motors, stepper motor and
servomotor designs. See page 261 for Servo Jack motor mount examples,
contact Nook Industries for additional information.
Actionjac™ Worm Gear Screw Jacks can be ordered
with industrial quality induction motors. All motors have internally
wired, integral, spring actuated brakes. Standard motors are 3-phase,
230-460 VAC, 60hz, 1725 rpm. Single-phase motors are 115-130 VAC,
60hz, 1725 rpm. All motors are rated for continuous duty. Specific
duty motors may be supplied upon request.
See charts for order codes and motor mount
dimensions. For MOTOR REFERENCE DIMENSIONS.
CAUTION: Ball
Screw Jacks are self-lowering. A brake of sufficient torque is required
to hold the load with a ball screw jack. Be sure to verify that
the brakemotor selected has sufficient brake torque for your application.
|
